What What What

What you need to know about the Ethereum merge

Mads Eberhardt

Cryptocurrency Analyst

Summary:  In August, Ethereum’s transition from proof-of-work to proof-of-stake known as the merge is expected to take place, and the first public test of the merge is set to occur tomorrow. The merge might be one of the most influential events in the history of crypto by impacting Ethereum both technically and economically. We look into the ways that the merge changes Ethereum.


Since releasing the first Ethereum whitepaper in 2014, Ethereum’s developers have explicitly mentioned their desire to eventually adapt proof-of-stake instead of proof-of-work, but due to technical difficulties, it has not previously been feasible. Yet, Ethereum’s transition from proof-of-work to proof-of-stake - known as “the merge” - is now closer than ever. On the 8th of June, the first public test of the merge is set to occur subsequent to seven other minor tests. On this day, the existing test network Ropsten is set to perform a merge. If the Ropsten merge is successful, Ethereum will merge two other existing test networks, ahead of the actual merge. With this knowledge and insight from the Ethereum Foundation, it seems reasonable to consider that the merge will take place in August, considering that the tests turn out well. With the merge taking place in the near future, we look at the ways it changes Ethereum both technically and economically.

From miners to stakers

The most substantial change is the transition from proof-of-work to proof-of-stake, fundamentally changing by what method the network verifies transactions. Instead of tremendous computing power put at the network’s disposal by miners, holders of Ether are those to verify transactions. This means that holders have the option to lock their Ether as collateral to be able to verify transactions, in other words, stake their Ether. In return, they receive the transaction fees alongside the security cost. The latter is the newly issued Ether to financially encourage miners at this point in time, but it later goes to stakers for verify transactions. With proof-of-stake, the main security feature is that stakers can be slashed. In case the network determines that a staker has behaved unethically, for instance, tried to reverse transactions, the network can take some or all of their staked Ether.

More environmentally friendly

When adapting proof-of-stake, Ethereum reduces its energy consumption by around 99.95%. To understand why we must again consider the differences between the consensus mechanisms. With respect to Ethereum, a new block is currently finalized around every 13th second. In these 13 seconds, every miner fights to be the one to finalize the block. This involves applying computing power and thus requires electricity. However, in the end, it is solely one miner that finalizes the block and verifies the transactions, even though other miners have spent a tremendous amount of energy on the same block. In terms of proof-of-stake, one validator is randomly chosen to finalize a block based on one’s amount of Ether staked. This happens prior to the block, so no other staker is trying to finalize the same block, ultimately reducing Ethereum’s energy consumption by around 99.95%.

Improved and fairer economics

Because the energy required to verify transactions on Ethereum drastically decreases, the security cost can likewise decline massively. With proof-of-work, Ethereum’s security cost amounts to around 5.4mn Ether yearly. This means that 5.4mn new Ether gets issued yearly to the present supply of around 120mn Ether to encourage miners to verify transactions. At the time of the merge, the security cost declines to around 0.5mn Ether yearly being compensated to stakers. This is an extensive reduction in the inflation of Ethereum, which might even make Ethereum deflationary since the paid transaction costs are expected to outpace Ethereum’s security cost. With respect to transaction fees, a substantial part of these get burned, hence removed from the supply. Over time this might result in a supply shock because the market is used to absorbing 5.4mn newly issued Ether yearly but suddenly only around 0.5mn Ether is to be issued.

One might also argue that proof-of-stake is economically fairer for holders of Ethereum than proof-of-work. With proof-of-work, you can technically verify transactions without holding Ether as long as you invest heavily in computing power. This means that holders are not compensated for the inflation and transaction fees, effectively diluting them. In the case of proof-of-stake, stakers are compensated fairly for the inflation and transaction fees.

Not significantly more scalable, though

By default, the merge does not make Ethereum significantly more scalable. If the merge turns out well, the merge decreases the block size from around 13 to 12 seconds but maintains the same block size. This ultimately leads to an increase in transactional output of 7.5% but not much more than that. Based on the present schedule, Ethereum will first significantly improve scalability sometime in 2023. It is intended that shard chains get implemented around here, which will massively improve Ethereum’s scalability and possibly require even less hardware to verify transactions.

12.8mn Ether to be unlocked later

On December 1st, 2020, the proof-of-stake version of Ethereum went live, known as the Beacon Chain. The Beacon Chain is technically the one to be merged with proof-of-work based Ethereum when the merge occurs. The Beacon Chain has been finalizing empty blocks since it went live to ensure that it works as intended. To verify these blocks, Ethereum holders have been able to stake Ether on the Beacon Chain. Over 10% of the total supply of Ether, around 12.8mn Ether, is now staked on the Beacon Chain.

However, by staking Ether on the Beacon Chain, the Ether has been locked. It was originally planned to unlock the staked Ether when the merge occurs, but to simplify the merge from a technical point of view, Ethereum’s developers have chosen not to unlock the staked funds at the time of the merge. The unlocking will likely follow 6 months after the merge, in which the 12.8mn Ether alongside the afterward staked Ether will be unlocked. The compensated security cost and transaction fees to stakers are likewise locked in these months. This means that presumably until next year no newly issued Ether nor transaction fees are expected to hit the circulating supply, potentially limiting selling pressure. On the other hand, when the staked Ether is unlocked, which is not unlikely to be above 15mn Ether at that time, it might result in severe selling pressure.

More of the same

The merge will not impact Ethereum by other substantial means. First, it is not planned to impact or require holders of Ether to take an active stance. The merge will occur without them noticing. Secondly, it should not influence tokens or decentralized applications presently utilizing Ethereum. This means that deployed tokens and smart contracts on Ethereum are planned to work like before the merge.

Although Ethereum’s developers have worked on the merge for years, it can turn out bad or be further delayed. Just like everything else in crypto, there are simply no guarantees.
 
Disclaimer

Saxo Capital Markets (Australia) Limited prepares and distributes information/research produced within the Saxo Bank Group for informational purposes only. In addition to the disclaimer below, if any general advice is provided, such advice does not take into account your individual objectives, financial situation or needs. You should consider the appropriateness of trading any financial instrument as trading can result in losses that exceed your initial investment. Please refer to our Analysis Disclaimer, and our Financial Services Guide and Product Disclosure Statement. All legal documentation and disclaimers can be found at https://www.home.saxo/en-au/legal/.

The Saxo Bank Group entities each provide execution-only service. Access and use of Saxo News & Research and any Saxo Bank Group website are subject to (i) the Terms of Use; (ii) the full Disclaimer; and (iii) the Risk Warning in addition (where relevant) to the terms governing the use of the website of a member of the Saxo Bank Group.

Saxo News & Research is provided for informational purposes, does not contain (and should not be construed as containing) financial, investment, tax or trading advice or advice of any sort offered, recommended or endorsed by Saxo Bank Group and should not be construed as a record of our trading prices, or as an offer, incentive or solicitation for the subscription, sale or purchase in any financial instrument. No representation or warranty is given as to the accuracy or completeness of this information. All trading or investments you make must be pursuant to your own unprompted and informed self-directed decision. No Saxo Bank Group entity shall be liable for any losses that you may sustain as a result of any investment decision made in reliance on information on Saxo News & Research.

To the extent that any content is construed as investment research, such content was not intended to and has not been prepared in accordance with legal requirements designed to promote the independence of investment research and as such, would be considered as a marketing communication.

None of the information contained here constitutes an offer to purchase or sell a financial instrument, or to make any investments.Saxo Capital Markets does not take into account your personal investment objectives or financial situation and makes no representation and assumes no liability as to the accuracy or completeness of the information nor for any loss arising from any investment made in reliance of this presentation. Any opinions made are subject to change and may be personal to the author. These may not necessarily reflect the opinion of Saxo Capital Markets or its affiliates.

Please read our disclaimers:
- Full Disclaimer (https://www.home.saxo/en-au/legal/disclaimer/saxo-disclaimer)
- Analysis Disclaimer (https://www.home.saxo/en-au/legal/analysis-disclaimer/saxo-analysis-disclaimer)
- Notification on Non-Independent Investment Research (https://www.home.saxo/legal/niird/notification)

Saxo Capital Markets (Australia) Limited
Suite 1, Level 14, 9 Castlereagh St
Sydney NSW 2000
Australia

Contact Saxo

Select region

Australia
Australia

The Saxo trading platform has received numerous awards and recognition. For details of these awards and information on awards visit www.home.saxo/en-au/about-us/awards

Saxo Capital Markets (Australia) Limited ABN 32 110 128 286 AFSL 280372 (‘Saxo’ or ‘Saxo Capital Markets’) is a wholly owned subsidiary of Saxo Bank A/S, headquartered in Denmark. Please refer to our General Business Terms, Financial Services Guide, Product Disclosure Statement and Target Market Determination to consider whether acquiring or continuing to hold financial products is suitable for you, prior to opening an account and investing in a financial product.

Trading in financial instruments carries various risks, and is not suitable for all investors. Please seek expert advice, and always ensure that you fully understand these risks before trading. Saxo Capital Markets does not provide ‘personal’ financial product advice, any information available on this website is ‘general’ in nature and for informational purposes only. Saxo Capital Markets does not take into account an individual’s needs, objectives or financial situation. The Target Market Determination should assist you in determining whether any of the products or services we offer are likely to be consistent with your objectives, financial situation and needs.

Apple, iPad and iPhone are trademarks of Apple Inc., registered in the US and other countries. AppStore is a service mark of Apple Inc.

The information or the products and services referred to on this website may be accessed worldwide, however is only intended for distribution to and use by recipients located in countries where such use does not constitute a violation of applicable legislation or regulations. Products and Services offered on this website is not intended for residents of the United States and Japan.

Please click here to view our full disclaimer.